Buy Nacelle Mounted Lidar Production Introduction 聽 The wind turbines become predictive and controllable thanks to the smart wind lidars. The vertical wind lidar can be used for wind resource assessment. Nacelle wind lidar can be adopted for power curve prediction and analysis. Scanning wind lidars can be applied for turbine wake detection. The smart lidar for wind turbines enable the possible prediction of wind resource, power performance, power generation improvement etc. The smart lidars contribute to the development of smart wind energy. 聽 The lidar for wind turbines is able to optimize the energy production and reduce the fatigue and extreme loads of wind turbines. H400/H200 is a promising way to obtain an accurate measurement of incoming wind direction over the full rotor plane ahead of the turbine. It measures up to 400m ahead of the lidar point. 聽 Product Certificates 聽 The onshore vertical Lidars and offshore floating lidar systems, 3D scanning Lidars and nacelle Lidars have got verification by WindGuard, DNV_GL, SGS and other international authorities, proved to be the world-class equipment. The data accuracy reaches the wind cup class level, compliant with IEC61400-12-1 standards. The performance indicators of nacelle lidar is compliant with IEC 61400-50-3 standard. The laser source of 1550nm wavelength is a Class 1M laser product which meets the eye-safety EN 60825-1 standards. The Lidars are also CE marked, ready for shipment to European market, Asian market and Middle East as well. 聽 Product Applications 聽 Onshore and Offshore Wind Energy 鈥?Accurate Wind Resource Assessment 鈥?Power Performance Verification 鈥?Bankable Data to Reduce Fund Risk 鈥?Power Curve Assessment and Prediction 鈥?Turbine Efficiency Evaluation 鈥?Turbine Wake Detection 鈥?Wind Farm Control and Optimization 鈥?Wind Shear Monitoring and Load Shedding 鈥?Site Selection and Feasibility Study 鈥?Offshore Virtual Met Tower 聽聽Buy Nacelle Mounted Lidar website:http://www.leicelidars.com/wind-lidars/nacelle-mounted-lidar/